Tips for Downloading PDF files

	Technical Specification S121 Insulating Oil Purification Plant Type "E" This specification describes the equipment as supplied by FILTERALL for the processing (degassification, dehydration, filtration and de-acidification) of transformer insulating oil. FILTERALL purifiers are designed for processing transformer oil in workshops or in the field, in storage tanks, drums or directly in transformers. Purification of oil in transformers can be carried out off-load or on-load depending on customer's preference.
	Technical Specification S122 Industrial Oil Purifier Type "I" This specification describes the equipment as supplied by FILTERALL designed to remove solid and liquid contamination by filtration and vacuum dehydration. The purifier is fully automatic and operates safely without supervision. It is available in a range of capacities as a self-contained stationary or mobile unit.
	Technical Specification S124 Coalescer Turbine Oil Purifier Type "CT" This specification describes the equipment as supplied by FILTERALL designed for continuous purification of turbine oil by incorporating a three-stage solids/water separator, which requires minimum attention and allows for 24 hours per day operation. .
	Technical Specification S125 Cleanable Oil Filter Type "FC" This specification describes the equipment as supplied by FILTERALL, the use of centrifugal filters in various industrial areas.
	Technical Specification S127 Cable Oil Degasifier Purifier Type "EC" This specification describes the equipment as supplied by FILTERALL designed to carry out filtration, degasification and dehydration in two stages to ensure satisfactory treatment in a single pass through the unit.
	Technical Specification S210 Stationary Transformer Oil Regeneration Plant Type "SPR" This specification describes the equipment as supplied by FILTERALL has been designed for the complete regeneration of transformer oil on a fixed site basis and treated oil will exceed quality requirement for new Transformer Insulating Oil.
	Technical Specification S211 Mobile Transformer Oil Regeneration Plant Type "MRP" This specification describes the equipment as supplied by FILTERALL designed specifically for on-site use to completely regenerate insulating oils in energised or de-energised transformers.
	Technical Specification S212 Stationary Transformer Oil PCB Decontamination Plant Type "PCB- D" This specification describes Filterall stationary plant type PCBD that has been designed for treatment of transformer oils contaminated with up to 1000-PPM polychlorinated biphenyls.
	Technical Specification S213 COMPACT Transformer Oil Regeneration Plant - Type MRP(compact) This specification describes the COMPACT Transformer Oil Regeneration Plant as supplied by FILTERALL. Specifically designed to Regenerate Insulating oils in energised or de-energised transformers, this plant is available as a mobile or stationary configuration.
	Technical Specification S214 Compact Transformer Oil Regeneration Plant Type RPA Revision B - 2004 For The Recycling of Used Transformer Oils
	Technical Specification SFDP Multipurpose Filter Type "FDP/FDS" This specification describes the equipment as supplied by FILTERALL with applications in both the industrial and electrical industries, this unit offers a low priced, compact solution suitable for oil transfer and filtration of low volumes (20 litres/min.) such as transformer/lube system top-up. Available as a stationary or portable unit with a range of filtration elements (inter-changeable) from 0,5 micron to 30 micron. Also available with a water absorbing element which can absorb up to 1,5 litres of water with one element.